Freephone: 0800 074 0442

Manchester: 0161 748 4500

Cheshire: 01565 734 111

Bolton / Wigan: 01942 722 629

Ready-mix & volumetric concrete · New Mills

Ready Mix & Volumetric Concrete in New Mills

Fresh, on-site mixed concrete delivered across New Mills and the surrounding area — barrowed or pumped exactly where you need it.

Concrete delivery

Concrete delivery in New Mills

Barrow Mix has been supplying concrete across the North West since 1984. We deliver ready-mix and volumetric concrete throughout New Mills and nearby areas including Disley, Whaley Bridge, Hayfield and Marple — mixing every load fresh on site so there’s no part-load waste, and getting it into place by barrow, line pump or boom pump whatever the access.

Ready Mix Concrete

Fresh, consistent mixes for foundations, bases, floors and more.

Volumetric Concrete

Mixed to order on site — you only pay for exactly what you use.

Concrete Barrowing

Our speciality: we barrow concrete into spots a wagon can’t reach.

Line Pumping

Concrete pumped through hose to gardens, basements and tight access.

Boom Pumping

Reach over buildings and across sites with our boom pump.

Floor Screed

Smooth, level floor screeds for domestic and commercial builds.

Local ground conditions

The ground beneath New Mills

New Mills is built around the Torrs gorge at the Goyt–Sett confluence, where Millstone Grit rockhead is at or near the surface. Superficial cover is thin on the gritstone shoulders and confined to the valley floors. The governing risk here is the steep valley and gorge sides — slope instability and landslip potential — along with abrupt rockhead.

What that means for your pour: on or near the gorge slopes, a slope-stability appraisal comes before foundation design; competent gritstone gives excellent bearing where reached, but valley-edge plots need care and a site-specific concrete test.

Part of our Pennine fringe ground guide — see how New Mills fits into the wider Greater Manchester Ground Conditions & Foundations Atlas.

Sources: BGS Greater Manchester ground model (OR/20/033); BGS Glossop memoir (Sheet 86); Mining Remediation Authority; BGS Geology of Britain viewer. General guidance only — not a substitute for a site-specific ground investigation.

Radon — check before you pour

Radon in New Mills

New Mills sits on the gritstone fringe around the Torrs gorge, within or partly within a Radon Affected Area — the elevated-radon ground of the Peak edge.

if the address is affected, the ground-floor slab may need a radon barrier (and a sump at higher levels) under building regs. That specification is your designer’s and building control’s call — we pour the concrete floor to suit the specified membrane and sump detail.

See radon & concrete ground floors for what the building regs require. Check the specific address on the UKHSA radon map (ukradon.org) — radon is mapped per 1 km square, so it varies within a town. General guidance only, not a site assessment.

Flood risk — check before you pour

Flood risk in New Mills

New Mills sits high above the Goyt–Sett gorge, so most of the town is well clear of the water — but the riverside properties toward Furness Vale were evacuated in 2019. It’s the valley-floor plots, not the town proper, that carry the risk.

If your plot is on the low-lying ground, a Flood Risk Assessment may set a raised floor level and flood-resilient construction — a solid, low-permeability slab over continuous tanking. We pour the specified concrete to suit; the FRA and floor levels come from your designer and building control, not from us.

See flood risk & concrete for what’s required. Check the specific address on the EA flood map for planning — only the low-lying/valley-floor part of the area is affected, not the whole town. General guidance only.

Why Barrow Mix?

We run our own quarry, wagons and pumps — a genuinely self-sufficient supplier, so we’re not waiting on anyone else to get your concrete to site. See why that matters →

Questions

New Mills concrete — FAQs

Do you deliver ready-mix concrete to New Mills?

Yes – we deliver ready-mix and volumetric concrete across New Mills and nearby areas including Disley, Whaley Bridge, Hayfield and Marple, mixed fresh on site to the grade your job needs.

Can you get concrete to a tight or awkward spot in New Mills?

Yes – barrowing is our speciality (it’s in our name), and we run line and boom pumps for back gardens, basements, tight access and over-building reaches across New Mills.

Why is volumetric concrete cheaper for a New Mills job?

Because we mix on site as we pour, there’s no part-load waste – you pay for exactly what you use, not a rounded-up wagon load.

How do I get a concrete price for a New Mills job?

Call us on 0800 074 0442 with your postcode, the grade and roughly how much you need, and we’ll give you a free, no-obligation quote – often same or next day.

Need concrete in New Mills?

Call the yard for a fast, free quote — often same or next day.